Select Page

Glass Cutting

Water Jet

Provides relatively quick set-up and cutting of large glass sheets with curves, holes, and other shapes.

Cut Tolerances*
0.50 mm [0.020"]
Maximum Thickness
38.1 mm [1.500"]
Minimum Thickness
1.00 mm [0.040"]
Maximum Material Size
2,286 mm x 1,168 mm [90" x 46"]
Minimum Material Size
25.4 mm x 25.4 mm [1" x 1']

*Cut tolerance established for substrates = 3 mm [0.118″] thick. Cut tolerances are 1.00 mm [0.040″] for thicker substrates.

Bystronic (scribe cutting)

Cut Tolerances*
0.38 mm [0.015"]
Maximum Thickness
19 mm [0.756"]
Minimum Thickness
0.55 mm [0.022"]
Maximum Material Size
3,556 mm x 2,438 mm [140" x 96"]
Minimum Material Size
610 mm x 813 mm [24" x 32"]

*Cut tolerance established for substrates = 3 mm [0.118″] thick. Cut tolerances are up to 0.50 mm [0.020″] for substrates up to 6.40 mm [0.250″] thick and up to 0.64 mm [0.025″] for substrates up to 9.50 mm [0.380″] thick. 1 mm for 13 mm thick and 1.5 mm for 19 mm thick.

TLC (scribe cutting)

Cut Tolerances*
0.13 mm [0.005"]
Maximum Thickness
3 mm [0.125"]
Minimum Thickness
0.1 mm [0.004"]
Maximum Material Size
635 mm x 635 mm [25" x 25"]
Minimum Material Size
51 mm x 51 mm [2" x 2"]

*Cut tolerance established for substrates = 2.5 [0.100″] mm thick. Cut tolerances are up to 0.25 mm [0.010″] for substrates up to 6.40 mm [0.250″] thick.

Precision XY Sawing (Slicer)

Cut Tolerances*
0.025 mm [0.001"]
Maximum Thickness
5mm [0.236"]
Minimum Thickness
0.20 mm [0.008"]
Maximum Material Size
165 mm x 165 mm [6.5" x 6.5"]
Minimum Material Size
51 mm x 51 mm [2" x 2"]

Precision XY Saw Cutting of Glass, Wafers & Filters Spec Sheet

*Cut tolerance established for substrates = 2.5 [0.100″] mm thick. Cut tolerances are 0.05 mm [0.002″] for thicker substrates.

Hand Cutting

Cut Tolerances
0.76 mm [0.030″]
Maximum Thickness
6.35 mm [0.250"]
Minimum Thickness
0.50 mm [0.020"]
Maximum Material Size
1,828 mm x 1,524 mm [72" x 60"]
Minimum Material Size
51 mm x 51 mm [2" x 2"]
Maximum Part Size
762 mm x 305 mm [30" x 12"]
Minimum Part Size
19 mm x 19 mm [0.75" x 0.75"]

Precision Saw (Tube & Rod Cutting)

Provides cutting of glass tubes or rods to required length. The precision saw provides ground edges while the diamond cutter provides cut edges.

Cut Tolerances
0.25 mm [0.010"]
Maximum Diameter
114.3 mm [4.50"]
Minimum Diameter
3.18 mm [0.125"]
Maximum Material Length
1524 mm [60"]
Minimum Material Length
102 mm [4.00"]
Maximum Part Length
635 mm [25"]
Minimum Part Length
38.1 mm [1.50"]
All Glass Fabrication
Spec Sheet

Ready to start your next project?

We strive to provide the best possible solutions and take pride in our attentiveness to your requirements.

Get a Quote
Contact Us