by Abrisa Technologies | Aug 6, 2021 | Fabrication Facts
Corning® Eagle XG® Corning® Eagle XG® is a borosilicate glass specifically designed for high performance LCD’s. It is considered environmentally friendly as it contains no heavy metals (arsenic, antimony, barium, or halides). The glass also features high surface...
by Abrisa Technologies | Aug 6, 2021 | Fabrication Facts
Glass that has been tempered or heat strengthened cannot be machined. Any fabrication done prior to the heat or tempering process must be smooth as well as chip and crack free. Any holes, notches, etc. should be located on the fabricated glass part so as to avoid...
by Abrisa Technologies | Aug 6, 2021 | Fabrication Facts
Low Iron Soda-Lime Glass or water-white glass is a clear transparent soda-lime-based glass that is almost tint-free, resulting from its being produced from higher quality grades of silica sand that are almost totally free of iron oxides. 1/8” thick low iron glass...
by Abrisa Technologies | Aug 6, 2021 | Fabrication Facts
Flat glass that has a seamed edge or slightly beveled edge is that which has been lightly sanded to remove any sharp burrs for. This glass is safe to handle but is not intended for decorative use. A sanding belt is used to lightly sand off the sharp edges of the glass...
by Abrisa Technologies | Aug 6, 2021 | Fabrication Facts
Strengthening glass can be done via three primary processes; tempering, thermal strengthening and chemical strengthening in order to increase the heat resistance and overall strength of the glass. Heat Tempering Toughened or tempered glass is a type of safety glass...
