Coating Solutions

Glass Products

divider
divider

Glass Fabrication

 

Hot Mirrors for Heat Control

underline
A hot mirror is essentially a thin film coating applied to substrate such as soda-lime or borosilicate glass in an effort to reflect infrared (IR) radiation either as a means to harness the reflected wavelengths for an application or to remove them from an application. It basically separates visible light from heat.

 

HM-VS-950 Hot Mirror
Hot mirror filters transmit the visible spectrum and reflect the infrared at normal incidence. The average transmittance is specified to be more than 93% from 425 to 675nm and average reflectance is more than 95% from 750 to 950nm. Custom angles of incidence can be designed to specification.
HM-VS-950-Hot-Mirror

 

HM-VS-1150 Hot Mirror Filter
These hot mirror filters transmit the visible spectrum and reflect the infrared at 0 degrees. The average transmittance is more than 93% from 425 to 675nm. The average reflectance is more than 95% from 750 to 1150nm. Custom angles of incidence can be designed to specification.
HM-VS-1150-Hot-Mirror

 

HM-VS-1500 Hot Mirror
Extreme performance hot mirrors offer enhanced UV blocking.
Average T ≥85% 420-680nm
Average T ≤1% 200-380nm
Average R ≥95% 730-1500nm
HM-VS-1500

 

HM-VS-1600 Hot Mirror Filter
Extended Hot mirror filters transmit the visible spectrum and reflect the infrared at normal incidence. The average transmittance is specified to be more than 85% from 425-675nm and average reflectance is more than 90% from 750-1150nm and 80% from 1150-1600nm. Custom angles of incidence can be designed to specification.
HM-VS-1600-Hot-Mirror

 

HM-VS-L900 Hot Mirror Filter
These hot mirror filters transmit the visible spectrum and reflect the infrared at normal incidence and offer reliable solutions for commercial applications.
HM-VS-L900-Hot-Mirror

 

HM-VS-3000 Hot Mirror Filter
Our HM-VS-3000 filter combines reflectance and absorptance to block a very wide band in the infrared while maintaining good visible transmittance.
HM-VS-3000

 

HM-UV-1050 UV Pass Hot Mirror
UV Hot mirror filters are specially designed to transmit more than 80% on average from 245-460nm and reflect more than 70% in average from 800-1050nm at normal incidence. Custom angles of incidence can be designed to specification.
HM-UV-1050-UV-Pass-Hot-Mirror

 

Typically, Hot mirrors provided by the ZC&R Coatings for Optics division of Abrisa Technologies, can be provided in thicknesses of 1.1 mm, 1.75 mm, and 3mm and in diameters up to 24″. Custom sizes and thicknesses are available upon request. Click Here for you custom inquiry.

 

Typical features of our Hot Mirrors include:

  • High transmission for the visible light range
  • High reflection of infrared
  • Utilize high quality borosilicate glass substrates – SCHOTT Borofloat®
  • Thin film dielectric multi-layer coating
  • Standard angles of incidence are 0 and 45 degrees
    •  

Home | About Us | Markets & Applications | Products & Services | News & Events | Contact Us
Terms of Use | Privacy Policy | Site Map | Terms of Sale | Send Comments About this Site to: Abrisa Technologies Webmaster

AbrisaTechnologies.com © 2010 Abrisa Technologies All Rights Reserved