Coating Solutions

Glass Products


Glass Fabrication


Abrisa Technologies Applies Single & Multi-Layer Anti-Reflective Coatings to
Glass Substrates that are Designed for
Low Reflectance & High Transmission


Download this information as a pdf adobe acrobat logo


Santa Paula, CA – Abrisa Technologies’ ZC&R Coatings for Optics (ZC&R) division, located in Torrance, California, provides both single and multi-layer all dielectric anti-reflective (AR) coatings onto glass substrates that are designed for low reflectance and high transmission. The AR coated glass can be used at temperatures of ≥ 300°C and meet MIL-C-675C, MIL-C-14806A, and MIL-C-48497A.


The coatings can be applied to standard glass substrates such as soda-lime float glass, borosilicate glass, water white float glass and more. Glass thicknesses ranging from 0.1mm up to 25.4 mm and even higher for custom requirements can be coated. Reflectance can be as low as 0.05% depending upon the wavelengths covered. Transmittance is very high, but varies due to substrate material.


AR coated glass is often a crucial component in optical systems with multiple lenses or other optics where maximum possible light energy is needed. AR coatings from ZC&R help produce brighter images while reducing the intensity of ghost images which are sometimes produced in optical systems having multiple reflecting surfaces.


Broad Wavelength Band AR Coatings provided include:

  • BARC-5 – High efficiency AR coating that reflects less than 0.5% average from 424-675 nm
  • BARC-11 – Provides a low level of reflectance across a wide spectrum from 400-100 nm
  • UV BBAR – Designed for the ultra-violet region, providing a low level of reflectance less than 0.5% average from 275 to 425 nm

Narrow Wave Length Band AR Coatings provided include:

  • BBAR Optimized for Telecommunications – Provides a low level of reflectance less than 0.25% average from 1450 to 1650 nm
  • Narrow Band AR (Nominally centered @ 1550 nm) – Excellent coating for single or narrow band of wavelengths
  • Narrow Band AR (Nominally centered @ 632.8 nm) – Excellent coating for single or narrow band of wavelengths
  • IR-BBAR 3-5 Microns – Provides a low level of reflectance for the mid-infrared spectrum 3000 to 5000 nm
  • IR-BBAR 8-12 Microns – Provides a low level of reflectance for the far-infrared spectrum 8µm to 12µm

In addition to the above mentioned anti-reflective (AR) coatings, ZC& R can provide custom thin film AR coatings to meet individual application-specific requirements to reduce the efficiency rate of the optical system.


Typical applications include:

  • Display windows
  • Industrial instrumentation
  • Medical optics
  • Port windows
  • Laser components
  • Telecommunications equipment
  • Miniature optics
  • Lenses

Abrisa Technologies is a recognized global supplier of high quality, fabricated glass components, optical thin film coatings, and custom glass solutions for a wide variety of industries. From our US based Abrisa Industrial Glass fabrication facility in Santa Paula, CA and our ZC&R Coatings for Optics division in Torrance, CA we serve diverse industries such as microelectronics and displays, semiconductor, military, automotive, aerospace, medical, biomedical and scientific R&D. We provide custom specialty flat glass and coating products for applications such as: flat panel display, touch and gesture recognition; visible to IR imaging and surveillance; entertainment, indoor and outdoor lighting; advanced instrumentation; and photonics.


Need information for Glass Substrates & Fabrication - Contact us Toll Free at: (877) 622-7472 or

Need information for Thin Film Optical Coatings - Contact us Toll Free at: (800) 426-2864 or

Home | About Us | Markets & Applications | Products & Services | News & Events | Contact Us
Terms of Use | Privacy Policy | Site Map | Terms of Sale | Send Comments About this Site to: Abrisa Technologies Webmaster © 2010 Abrisa Technologies All Rights Reserved