Coating Solutions

Glass Products


Glass Fabrication


Glass Cleaning

Abrisa Technologies’ Santa Paula manufacturing facility has multiple high volume wash stations to remove dust, finger-prints, and other contamination. Wash stations use high pressure heated water and soft nylon brushes to clean surfaces. Glass exits completely dry and ready for inspection. Cleanliness levels exceed expectations of industrial or commercial customers. Cleanroom, medical, or other high-end applications must be evaluated on a case by case basis.


Download this information as a pdf adobe acrobat logo


(Flat Glass Washers, Ultrasonic Tanks, Automated Dryers)
Cosmetic Requirements:

  • Typical
  • Enhanced

Substrate Thickness:

  • Typical
  • Enhanced
Up to 50.8 mm [2″] thick
Outside of range – “hand wash”

Substrate Size:

  • Typical Minimum
  • Typical Maximum
  • Enhanced
25.4 mm x 25.4 mm [1″ x 1″]
1,168 mm x 1,168 mm [46″ x 46″]
Outside of range – “hand wash”



Clean Rooms

Each Abrisa Technologies division’s Quality Management System has based its foundation on the International Quality System Standard ISO 9001:2008. Abrisa Technologies strives for excellence through various SPC (statistical process controls) methods such as control charts, continuous improvement and design of experiments to name a few as well as the use of 5S’s methodologies.


Certified to ISO 14644 – 1505
(at 5 microns)


Class 100 – 1,000 Size: (in. sq. ft.)
  • Total
  • Transfer Room
  • Gown Room
  • Main Clean Room
Class 10,000 – 100,000
Soft wall clean rooms for dust & particle control (screen print)
  • 500 sq. ft.
  • 96 sq. ft.


Home | About Us | Markets & Applications | Products & Services | News & Events | Contact Us
Terms of Use | Privacy Policy | Site Map | Terms of Sale | Send Comments About this Site to: Abrisa Technologies Webmaster © 2010 Abrisa Technologies All Rights Reserved